March 28, 2024, 07:58:14 AM

News:


Adding shims to the se compensator.

Started by 838, October 06, 2019, 01:00:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

838

My 117" currently has a game changer sprocket installed with the latest SE compensator/rotor kit. 09 FLHX. I've noticed that at mid RPMs during moderate to aggressive acceleration I get some noise... it's hard to explain the sound because there's a lot of noise at that point 🤘, but I'm guessing the auto tensioner has cranked up and my chain is real tight.

I'm reinstalling the stock sprocket and have purchased a twin power manual tensioner as well. For the newest SE  unit is there a potential of needing extra shims or small springs? If so what part numbers am I looking for?

Clutch is stock with SE spring and VPC. It's not slipping.

Finally getting around to working the bugs out of this build. Compensator service, venting the intake/crankcase breathers, and adding rockouts.

Ohio HD

Search the site, there are several posts on setting the spring stack height for the compensator.

Coyote

Or the sticky topics list. How easy is that?