Bike started missing, Pulled trouble codes PO1352 and P0562 Changed coil and wires then when cleared went for a test ride now it has check engine and Codes P0373 P01352 and P01355. Should I replace the Crank Position Sensor or is there more going on? it will not run for more than 3 seconds and die
Quote from: jimrookie on July 22, 2021, 07:37:52 PM
Bike started missing, Pulled trouble codes PO1352 and P0562 Changed coil and wires then when cleared went for a test ride now it has check engine and Codes P0373 P01352 and P01355. Should I replace the Crank Position Sensor or is there more going on? it will not run for more than 3 seconds and die
Sounds like more going on especially with P0562 which is displayed when battery positive voltage is less than 11.0 volts at 2000 RPM for longer than 5 seconds.
Start checking for broken, loose or rubbed through wiring especially to the coil and from the regulator.
Update on my code issue.after noticing an intermittent right turn signal and hand brake light not working started looking at a handlebar connection and as the kill switch also powers the coil. the connector had partially come apart. codes clear and problem solved. thanks for the input