April 24, 2024, 12:17:06 AM

News:


Removing Stator Wires From Connector

Started by WhipLash96, January 26, 2019, 10:34:46 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

WhipLash96

Hey there gentlemen,  I was wonder if you could assist me with how to remove the stator wires from the connector plug? I've never had to do this and the service manual isn't being very helpful.  2001 FLTR. Thanks
Thanks,
Whip

rigidthumper

use a tiny flat blade and pop the blue retainer out. Use that same flat blade to lift the connector release, found on the side of the pin, then pull the back, wire away from the housing.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

calif phil

As always, great advice from Rigid.  :up:I would add to douche the connector off with BrakeKleen first to make sure there is not dirt and grime in there that keeps the locking tab from unlocking.