Print Page - New comment „-IGNORED-„ in PV tables?

Title: New comment „-IGNORED-„ in PV tables?
Post by: Karl H. on January 23, 2024, 10:21:35 PM

After updating the PV firmware I find a new comment ,,-IGNORED-,,.
Does anybody know what this means?

IMG_5746.png

Title: Re: New comment „-IGNORED-„ in PV tables?
Post by: hrdtail78 on January 24, 2024, 09:27:29 AM

Yes, the calibration is not going to change these setting in the ECM and they are going to stay default. If you open each one. You should see a box that can be checked in upper right corner. This will take the ignore away and allow you to adjust these settings.

This might also be based on what program you are using.

Title: Re: New comment „-IGNORED-„ in PV tables?
Post by: Karl H. on January 24, 2024, 11:45:21 PM

Thank you for the helpful advice! :up:

HarleyTechTalk

Dyno & Tuning Zone => AFR & Tuning Zone => Topic started by: Karl H. on January 23, 2024, 10:21:35 PM