Question for a friend of mine....
He has a 1998 EGC and would like to install a 5 spoke wagon wheel off a 2006 Road King. This is a front wheel.
So is this doable with just a bearing change?
Thanks
The 98 is Timpkins and the 06 isn't if that helps.
Keith these adapters allow the use of the 3/4" axle in a 1" wheel bearing. Custom spacers would need to be made.
https://secure.vulcanworks.net/store/Wheel-Bearing-Adapter-Kit-1-to-3-4.html
these adapters work a treat, lots of outfits make them, I've made a few sets here at home
(https://i.imgur.com/KCsVG07.png)
The 98 has a cable driven speedometer, I think. If so the 06 wheel won't have the notch for the cable
Yes to cable speedo but I don't think the 06 does so that shouldn't be a problem. You' Just have an empty notch.
Quote from: WML57 on April 15, 2019, 09:52:42 PM
The 98 has a cable driven speedometer, I think. If so the 06 wheel won't have the notch for the cable
the notch is in the rotor so shouldn't be too hard to sort out
Thanks guys, I appreciate the info. Cheers