HarleyTechTalk

That's good info,making me rethink this. All started a few yrs back. Race walked first, then the main bearing went out and now the race walked again. Worried about the main bearing and if the case got compromised. Maybe just over thinking

Quote from: Sunny Jim on April 30, 2024, 06:50:00 AM

Quote from: Hossamania on April 30, 2024, 05:33:07 AMI can only imagine. Are higher costs mostly due to shipping or tariffs?

I was quoted $700 AUD down under for an imported after market Comp ramp.

That's $455 USD or $625 CAD.

Quote from: Hossamania on April 30, 2024, 05:33:07 AMI can only imagine. Are higher costs mostly due to shipping or tariffs?

I was quoted $700 AUD down under for an imported after market Comp ramp.

I can only imagine. Are higher costs mostly due to shipping or tariffs?

Glad you got it working!

replaced starter all is good cranks like a champ

Try buying in Australia Hoss . It's cruelty. 

Craig, after you changed to single plug heads did you notice any difference in your kickstarting routine? What was the motivation for changing from dual plug heads.

Well almost a year later and I put a set of the Tall Boys Cycles Footboard Relocation Kits on my 2008 bagger. I have a set as well for my 2009.

I need to adjust the shifter and then see if I need a longer shifter, but I don't think so. You can see how the board location changed from the photo above. Further forward, heel dropped down, and out a touch. I also just put new 13" shocks in place of the 12" shocks so I have additional lean angle.

I have a few more maintenance items to get done before I test ride them. I can't believe I actually have some time to work on one of mine. 

You cannot see attachments on this board.

Quote from: Deye76 on April 29, 2024, 04:31:44 PM

Quote from: Hossamania on April 29, 2024, 11:33:38 AMThey sure are proud of it!

$40.00 less than the Cycle Rama.

So I found out from a friend. Didn't know those things were that expensive.