HarleyTechTalk

The Baker instructions that would have been sent with the transmission discuss the need to introduce your motorcycle to the new Grudgebox ratios if you want cruise control. You can go to their website for more information if you need to.

The GrudgeBox transmission is 250 RPM overdrive in 6th gear.  If your cruise will engage in 5th gear, the system is working.  For now while waiting to remedy it (or ever if you wish) set cruise in 5th gear and shift without the clutch into 6th.  By not disengaging the clutch with the clutch lever, you trick cruise into staying engaged.

Try a search on this site.  IIRC Ohio HD has posted the gear ratio you may need.  The input "codes" can depend on the tuning device you use.

Should read atmospheric pressure (~100KPA) at key on, engine off, 60ish during cranking, transitioning to 30ish KPA @ idle.

  I have a warranted claim from a dealer for changing one and the charges out were 16 hours. That was on a Street Glide.

07 dyna twincam map sensor reading while cranking over at start up. And idling . 

Quote from: FXDBI on April 21, 2024, 10:01:37 PMFor interest sake anyone know what the flat rate hours is to change out the gear cassette on a 2008 Electra glide?  Thanks Bob

The closest info that I have is labor code 4366. Replace main drive gear and/or bearing 3.4 hours.

To change the main drive bearing of course the cassette comes out. And most transmission swaps would include the main drive gear and a new bearing. If not, probably knock about 1.0 or 0.7 hours off.

Hard Question. 

For interest sake anyone know what the flat rate hours is to change out the gear cassette on a 2008 Electra glide?  Thanks Bob

Need to figure out how to recalibrate your BCM for the RPM difference @ speed. It used to be as simple as changing the vehicle speed sensor (VSS) data in the map with TTS or PowerVision, but HD quit using a VSS with the 2021 touring models. Might be worth a call to Baker to see if they have any options.

If anyone has a cam recommendation for those heads I'm using I'm all ears.  I'm not intimidated by have to clearance the cam chest.  There's so many options 

New Baker Grudge box added in the fall.  Cruise stopped working "most of the time" and I just isolated yesterday that it still engages at 5th gear, but not 6th when I really need it most.

2022 Harley Tri Glide Ultra