I am looking at pushrods for my M8 cam conversion.
I already have a set of smiths Brothers adjustables on the bench out of the 120r.
I see SE do an M8 kit 17900058.
Twin cam is 18404-08.
Can some one explain the difference. Do I need new pushrod covers for the M8?
Cheers!
Quote from: Sunny Jim on September 19, 2017, 01:57:22 AM
I am looking at pushrods for my M8 cam conversion.
I already have a set of smiths Brothers adjustables on the bench out of the 120r.
I see SE do an M8 kit 17900058.
Twin cam is 18404-08.
Can some one explain the difference. Do I need new pushrod covers for the M8?
Cheers!
Twin cam push rods work fine. You need S&S push rod cover keepers #930-0129 to go along with Evo tubes if you already have some, or you can buy the cover kit #106-1340, which comes with the tubes and keepers.
Difference is the keepers/clips are 2.200" in length for the Milwaukee Eight.