March 28, 2024, 08:59:36 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


TTS Settings

Started by rbabos, April 12, 2019, 03:36:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rbabos

April 12, 2019, 03:36:33 PM Last Edit: April 12, 2019, 04:14:42 PM by rbabos
For a V rod that changes the front sprocket from 28-26 what is the setting in (primary ratio) to use so the speedo remains accurate. Rear sprocket is stock 72 tooth. Current stock setting in TTS for primary ratio is 1.828. The actual engine gear drive ratio is 64/117. Just want to be sure of what setting to use for the 26 instead of the 28
Ron

Ohio HD

Wouldn't you change it in the VSS?


[attach=0]

rbabos

Quote from: Ohio HD on April 12, 2019, 04:26:51 PM
Wouldn't you change it in the VSS?


[attach=0,msg1291995]
I saw that and played with it but it's only a calculator. How do you put the change into the primary numbers for ECM constants?
Ron

Ohio HD

You do it as you flash the ECM with the MAP. When you flash the ECM you get the option to change the VSS as well before download.

rbabos

Quote from: Ohio HD on April 12, 2019, 04:43:55 PM
You do it as you flash the ECM with the MAP. When you flash the ECM you get the option to change the VSS as well before download.
No "Potty mouth"? That simple?
Ron

Ohio HD

It's in the settings.


[attach=0]

rbabos

Quote from: rbabos on April 12, 2019, 04:45:12 PM
Quote from: Ohio HD on April 12, 2019, 04:43:55 PM
You do it as you flash the ECM with the MAP. When you flash the ECM you get the option to change the VSS as well before download.
No "Potty mouth"? That simple?
Ron
Thanks Brian.
Ron

Ohio HD

Quote from: rbabos on April 12, 2019, 04:57:18 PM
Quote from: rbabos on April 12, 2019, 04:45:12 PM
Quote from: Ohio HD on April 12, 2019, 04:43:55 PM
You do it as you flash the ECM with the MAP. When you flash the ECM you get the option to change the VSS as well before download.
No "Potty mouth"? That simple?
Ron
Thanks Brian.
Ron

:up:

Ohio HD

FYI Ron, just so I was clear, the primary numbers don't change, they don't effect the speedometer. Every time you reflash the ECM, it'll show default for the VSS, but you can ignore making a VSS change when you know the correct info is already in the ECM.

rbabos

April 13, 2019, 05:38:01 AM #9 Last Edit: April 13, 2019, 08:36:07 AM by rbabos
Quote from: Ohio HD on April 12, 2019, 07:13:43 PM
FYI Ron, just so I was clear, the primary numbers don't change, they don't effect the speedometer. Every time you reflash the ECM, it'll show default for the VSS, but you can ignore making a VSS change when you know the correct info is already in the ECM.
Understood. :up: Not for me but a bud using TTS. As you know, I use PV and that speedo deal can be set in the calibration prior to loading.
Ron