After going thru many starter relays my bagger clicks only sometimes and won't turn engage the starter ? Starter is new and the cables . Anyone know where the starter relay grounds to on the bike ? Any ideas ? I gave up and just installed a manual push button on the starter solenoid . :banghead:
under the battery tray
Try this:
Loosening the Starter, alternating the tightening sequence, and "tap" the starter Button occasionally until you reach torque.
Pretty common on the 01 and earlier.
If its even off a little on the alignment, the Solenoid will not push out the Bendix.
check your inbox
Box checked
messages sent
Thanks Dave , but it did not work out .
try to do voltage drop tests starting at battery and proceeding forward.
Rebuilt the solenoid all good thanks Dave .