Does anyone know if a man bought a bare throttle body could the guts be replaced with my old one from my 09 electra glide?
I've done it, take pictures and pay attention to everything
Quote from: harpwrench on March 25, 2024, 05:37:47 PMI've done it, take pictures and pay attention to everything
Is there alot goin on in there? Anything have to be clocked when reinstalled?
Not a whole lot, yes
Ok thanks. I wanna buy a cheap gutted one to port match to these heads I bought and just swap guts and go when I go to build the top end. An intake manifold from an 11 electra should fit my 09 right?
I think there was an early and later version of the stock FBW TB, but don't know the particulars. In my case I replaced the housing on an SE58 that cracked after porting it too thin.
Quote from: Shep236 on March 25, 2024, 06:42:09 PMOk thanks. I wanna buy a cheap gutted one to port match to these heads I bought and just swap guts and go when I go to build the top end. An intake manifold from an 11 electra should fit my 09 right?
You need to be careful. Some of the later ones were very thin in some areas. I have a some cores, and if I get a chance, I will try to figure out the years of the bad ones.
John
2008-2010 were the thicker bodies.