Baker Comp

[NHBagger]

Looks like baker has come out with a new Comp for twin cams and M8s?

[misfitJason]

well, yes there is
https://bakerdrivetrain.com/products/m8-compensator-sprocket?variant=29823539675214

[Admiral Akbar]

They widened the contact area.  Starting to look a little more like the M8 comp.   Good for them..

[misfitJason]

Holy crap. Just saw that it's 600 bucks. My baker comp was only 299

[Hossamania]

Holy crap. Just saw that it's 600 bucks. My baker comp was only 299

Took me a while to find that price, smallest print on the page!

[CVOThunder]

Ouch. Hope it lasts a long time under extreme power to be worth that price. Looks well engineered so guess we'll see if it's worth the bucks.

[Rob L]

Who's willing to be the guinea pig to drop the 6 hundy on that to see how long it lasts?

[twincamzz]

Delete

[jmorton10]

Took me a while to find that price, smallest print on the page!

I gave up looking for it

~John

[rbabos]

Spring looks too weak to be useful other then cruise loads. This can cause crank hammering and be worse then a solid sprocket is how I see it. Also 5 years late to the party but they finally clued in on how oiling a comp works.
Ron

[PoorUB]

Yep, the current HD compensator if fine. Good luck selling $600 comps, someone will buy them!

[Jim Bronson]

Try $728 for touring models.

[PoorUB]

 

[Ohio HD]

They must not like you Jim, $599.


[attach=0]

[TXChop]

Try $728 for touring models.

Thats with the rotor if needed.

[Ohio HD]

Try $728 for touring models.

Thats with the rotor if needed.

[Jim Bronson]

It's the old "while you're in there" cliche.  Cha-ching.

[calif phil]

It's got to be better than their last attempt at a Compensator. 

[TXChop]

It's got to be better than their last attempt at a Compensator.

Dont think it could be any worse.

(have you seen their warranty statement)

[Buglet]

    I have one of his old ones sitting on the shelf, I guess I should throw it out.