My Shovel project needs the exhaust mounted and the bracket isn't even close to fitting so I'll have to fabricate one.
Any good ideas out there to mount these in a reliable and practical manner? I suppose my first thought is to make a bracket from RHS box section. The front muffler is real close to frame so muffler bracketry will have to be underneath. Then I thought a second bracket on each muffler clamp. In the case of the front muffler-clamp, it could go to the redundant footboard lug.
Just trying to make something that works reliable and not following originality.
Thoughts, tips or chat welcome. Fire away, I start tomorrow.
Thanks!
hdrs.jpg