March 29, 2024, 03:13:29 AM

News:


Recent posts

Pages1 2 3 ... 10
1
General / Re: Lifters
Last post by hattitude - Yesterday at 07:22:34 PM
Quote from: IronButt70 on March 27, 2024, 06:44:50 AM
Quote from: JSD on March 25, 2024, 09:03:23 PMAlways use koyo full roller


Always had good results with Torringtons too.


FYI.... Due to Torrington selling to Timken, who later sold the Torrington Bearing line to JTEKT Corporation of Japan, Torrington bearings are now marketed solely under the Koyo brand name.

https://www.sonnax.com/posts/833-jtekt-north-america-koyo-bearings-notice
2
General / Re: Pro Action Suspension
Last post by brent - Yesterday at 06:20:19 PM
thanks
3
Twin Cam / Re: SE Transmission info neede...
Last post by Ohio HD - Yesterday at 05:25:43 PM
Quote from: fbn ent on Yesterday at 04:28:18 PMYes, thanks Brian! Hit the nail on the head. That is why I asked here.... :hug:

I said kit number 1060 as I assume you're working on an FLH bike. Other models have a different kit number.   
4
Twin Cam / Re: SE Transmission info neede...
Last post by FSG - Yesterday at 04:35:02 PM
you going to put a Squirrel Cage in there ?
5
Twin Cam / Re: SE Transmission info neede...
Last post by fbn ent - Yesterday at 04:28:18 PM
Yes, thanks Brian! Hit the nail on the head. That is why I asked here.... :hug:
6
Twin Cam / Re: SE Transmission info neede...
Last post by Deye76 - Yesterday at 04:10:49 PM
Good call Brian.
To the OP Jims made those 6 spds for SE. In addition they were made to Bakers O.D. design in an agreement between the 2.
7
Twin Cam / Re: SE Transmission info neede...
Last post by Ohio HD - Yesterday at 04:07:46 PM
Have you looked at the Jim's USA 1060 kit? It's for SE six speeds for 1990 to 2006 bikes.

https://www.jimsusa.com/wp-content/uploads/2019/09/1060-IS.pdf
8
Twin Cam / Re: SE Transmission info neede...
Last post by fbn ent - Yesterday at 03:53:24 PM
Thanks guys but I have the paperwork for that. Like I said, those parts aren't listed or pictured.  :nix: #23 has bearings in it which are in the 5 speed parts books. No mention of the countershaft bearing at all. I'm hoping someone has a line to the MoCo to find out. My counterfolk are pretty green.
9
Twin Cam / Re: SE Transmission info neede...
Last post by FSG - Yesterday at 03:43:20 PM
10
General / Re: M???? in the section
Last post by FSG - Yesterday at 03:29:20 PM
L1009       2024-02-13
Pages1 2 3 ... 10