Text only | Text with Images

HarleyTechTalk

Technical Forums => Evo Sportster => Topic started by: WhipLash96 on April 27, 2021, 01:58:07 PM

Title: 2009 Swingarm Rubber Isolator Removal
Post by: WhipLash96 on April 27, 2021, 01:58:07 PM
I'm working on a 2009 883. I have to replace the swingarm and I have it down to the rubber pucks and I have the left side off with the pivot shaft out. Now I need to remove the right side puck. Do I need to remove the link that is on the right side of the frame and connects to the engine case in order to remove the puck?

Thanks!
Title: Re: 2009 Swingarm Rubber Isolator Removal
Post by: newbie17 on April 28, 2021, 11:57:38 AM
The P/N: for your question is 99484-09, Service manual.
You won't regret it!
Title: Re: 2009 Swingarm Rubber Isolator Removal
Post by: WhipLash96 on May 11, 2021, 06:32:23 AM
Quote from: newbie17 on April 28, 2021, 11:57:38 AM
The P/N: for your question is 99484-09, Service manual.
You won't regret it!

It's not my bike so I'm nt going to buy a service manual. :scratch: But I got the bike back on the road without it. Thanks.
Text only | Text with Images