Text only | Text with Images

HarleyTechTalk

Vendors That Support This Site => Baker Drivetrain => Topic started by: jdhd on February 19, 2018, 03:24:02 PM

Title: 2007 primary cover / trans output shaft bearing
Post by: jdhd on February 19, 2018, 03:24:02 PM
  Ordered from Baker the primary bearing update kit. Received bearing and seal in a plastic bag.  Checked the bearing ID fitment on the shaft, seams loose.  Inner race turns with very little resistance on the shaft. Used two different calipers.  .003 to .004 clearance? Good or Bad ?  May be wrong, but thought the tolerance would be tighter.

                                                                                     Thanks, JD
Title: Re: 2007 primary cover / trans output shaft bearing
Post by: kd on February 19, 2018, 04:35:10 PM
 :pop: :soda:
Title: Re: 2007 primary cover / trans output shaft bearing
Post by: Mark P on July 25, 2018, 01:49:43 PM
.003-.004 is correct it is a slip fit.
Text only | Text with Images