Text only | Text with Images

HarleyTechTalk

Technical Forums => Twin Cam => Topic started by: 838 on October 30, 2019, 01:58:39 PM

Title: couple 110” head questions?
Post by: 838 on October 30, 2019, 01:58:39 PM
What is the typical chamber volume range on these (air cooled)? How large of a chamber can they be worked to? Where is a good place to source these castings?

Thanks
Title: Re: couple 110” head questions?
Post by: jsachs1 on October 30, 2019, 02:47:48 PM
95cc avg.
Can't help with how much, never went in that direction. 100cc would be within reason. Dished pistons are available as another option.
John
Title: Re: couple 110” head questions?
Post by: Don D on October 31, 2019, 03:42:41 PM
I have some nice black castings.
Title: Re: couple 110” head questions?
Post by: rking1550 on October 31, 2019, 03:52:00 PM
I'm running 110 heads that have been opened up to 102cc. Heads where worked by T-man.
Title: Re: couple 110” head questions?
Post by: Hillside Motorcycle on November 01, 2019, 03:43:41 AM
Quote from: 838 on October 30, 2019, 01:58:39 PM
What is the typical chamber volume range on these (air cooled)? How large of a chamber can they be worked to? Where is a good place to source these castings?

Thanks

We have used black or granite castings.
Title: Re: couple 110” head questions?
Post by: prodrag1320 on November 01, 2019, 05:00:55 AM
seen anywhere from 94 to 98cc.their pretty inconsistant,dont assume,check the set you get
Text only | Text with Images