May 07, 2024, 01:11:53 AM

News:

Recent posts

Pages1 2 3 ... 10
1
General / Re: front plug is black rear i...
Last post by rigidthumper - Yesterday at 07:08:59 PM
I'd replace the intake seals & verify the injector wiring is intact.
2
General / front plug is black rear is wh...
Last post by chas - Yesterday at 06:14:43 PM
My front plug on 03 Ultra is running black and rear is white. Im getting a stutter running at 40 mph. Im running an improved stock map on power vision. When adding 3% fuel I'm getting less decel pop. Any thoughts? Thanks in advance
3
Twin Cam / Re: 09 - 103 heads
Last post by RK103 - Yesterday at 05:22:02 PM
thank you
4
Twin Cam / Re: 09 - 103 heads
Last post by Ohio HD - Yesterday at 05:14:04 PM
Most are about 86cc  +/-
5
Twin Cam / 09 - 103 heads
Last post by RK103 - Yesterday at 05:02:35 PM
what are the cc's of stock 09 - 103 heads?
6
Milwaukee-Eight / Re: 2019 M8 Rear head gasket l...
Last post by TXHogrider - Yesterday at 07:56:39 AM
I had the same thing happen to my 2019 Street Glide special.  Happened early enough that the dealer replaced it under warranty.
7
Shovel Head / Re: Motor mount bolts
Last post by Fugawee - Yesterday at 05:05:18 AM
Quote from: CraigArizona85248 on May 05, 2024, 07:36:04 PMChevy starter shims.

Me too...as well as making up a couple out of a Beer Can back in the day.
 
8
For Sale Items / S&S Flywheels for sale
Last post by topcat3815 - Yesterday at 12:02:14 AM
S&S 4.375 stroke fits 07 thru 16 twin cam A engines in perfect condition with 1400 miles on them decided to go to 124 engine need 4.635 stroke flywheels. $1000.00 plus freight located in N.C.

You cannot see attachments on this board.

You cannot see attachments on this board.
9
General / Re: M???? in the section
Last post by FSG - Yesterday at 12:00:26 AM
M1490               2024-03-04

M1478 (Rev B)   2024-03-27
10
Shovel Head / Re: Motor mount bolts
Last post by CraigArizona85248 - May 05, 2024, 07:36:04 PM
Quote from: Fugawee on May 05, 2024, 06:32:12 PMTighten the Rear Bolts first, then the Front's.

That's the way I've always done it. Rear first. Then I check for a gap at the front with feeler gauges. I will shim the front with Chevy starter shims.
Pages1 2 3 ... 10