2007 primary cover / trans output shaft bearing

Started by jdhd, February 19, 2018, 03:24:02 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

jdhd

  Ordered from Baker the primary bearing update kit. Received bearing and seal in a plastic bag.  Checked the bearing ID fitment on the shaft, seams loose.  Inner race turns with very little resistance on the shaft. Used two different calipers.  .003 to .004 clearance? Good or Bad ?  May be wrong, but thought the tolerance would be tighter.

                                                                                     Thanks, JD

kd

KD

Mark P