Text only | Text with Images

HarleyTechTalk

Technical Forums => EVO 1340 => Topic started by: Deye76 on August 24, 2019, 05:20:00 PM

Title: No Turn Signals
Post by: Deye76 on August 24, 2019, 05:20:00 PM
1992 FXRP,  Bulbs good, Circuit breakers check OK, 12v to pin 1 of the turn signal module. Switch the meter to ohms, it pegs the meter. Bad module?
Title: Re: No Turn Signals
Post by: hbkeith on August 25, 2019, 05:04:19 AM
Not sure on the testing , I just took one off my buddys bike to see if mine was bad and it was , I went with the Badlands ATS-03-A $67 on Ebay , have to get creative on mounting it though but its plug and play
Title: Re: No Turn Signals
Post by: Deye76 on August 25, 2019, 11:24:02 AM
hbkeith, did that Badlands bolt up same as the OE?
Title: Re: No Turn Signals
Post by: hbkeith on August 25, 2019, 03:21:57 PM
No , different shape and bolt pattern
Title: Re: No Turn Signals
Post by: Deye76 on August 28, 2019, 04:16:53 PM
ATS-03-A  works like a charm. Thanks hbkeith.
Title: Re: No Turn Signals
Post by: hbkeith on August 29, 2019, 01:15:29 AM
How did you wind up mounting yours ?
Title: Re: No Turn Signals
Post by: Deye76 on August 29, 2019, 05:33:22 AM
Right behind the right side cover where the OE ignition module used to be, on one of those posts.
Text only | Text with Images