Print Page - 49mm dyna triple trees in older frame?

Title: 49mm dyna triple trees in older frame?
Post by: choseneasy on June 20, 2020, 12:49:36 PM

Is the stem length and outside diameter on the newer dyna's compatible with the older frame necks?
I am wondering if this would work on an aftermarket fxr frame? I don't have any of this in front of me but have access to the parts if it will work.
Thanks

Title: Re: 49mm dyna triple trees in older frame?
Post by: turboprop on June 20, 2020, 01:16:20 PM

Quote from: choseneasy on June 20, 2020, 12:49:36 PM
Is the stem length and outside diameter on the newer dyna's compatible with the older frame necks?
I am wondering if this would work on an aftermarket fxr frame? I don't have any of this in front of me but have access to the parts if it will work.
Thanks

Yes. Has been done many times.

Title: Re: 49mm dyna triple trees in older frame?
Post by: choseneasy on June 20, 2020, 01:29:13 PM

Thanks Turboprop. I was hoping you would see this.
FYI- Aftermarket fxr frame, wider and set up for a 180 tire.
It is gonna be fab'd up a bit but being aftermarket I'm good with that. Needs some tweaking on a jig but I should have it by fall.
I will have questions then!
Appreciate your threads and input.

Title: Re: 49mm dyna triple trees in older frame?
Post by: turboprop on June 20, 2020, 02:25:06 PM

Thank you for the kind words. Best of luck with your project.

HarleyTechTalk

Technical Forums => General => Topic started by: choseneasy on June 20, 2020, 12:49:36 PM