HarleyTechTalk

Dyno & Tuning Zone => AFR & Tuning Zone => Topic started by: 838 on August 02, 2019, 10:02:15 AM

Title: SE adjustable ignition part number.
Post by: 838 on August 02, 2019, 10:02:15 AM
"Don't know the P/N for it but it's the only SE ignition module that came with a hand-held programmer fob. You plug it into the data port and timing is at your fingertips."

Any ideas on the part number, or how to find one of these ignitions?
Title: Re: SE adjustable ignition part number.
Post by: rigidthumper on August 02, 2019, 10:12:29 AM
32124-04B was the SE Race Tuner for 04-06 ignition modules, where you could dial in the advance as you wanted. Marries to your ignition module, just like the SERT does with EFI ECMs, so don't buy a used one, it's already married to another IM.

32704-01  was the SE Pro Adjustable map ign system for 99-03 carb'd models. Came with an IM, and you could select 1 of 4 curves, and could advance or retard the entire curve.
Title: Re: SE adjustable ignition part number.
Post by: 838 on August 03, 2019, 10:49:28 AM
Quote from: rigidthumper on August 02, 2019, 10:12:29 AM
32124-04B was the SE Race Tuner for 04-06 ignition modules, where you could dial in the advance as you wanted. Marries to your ignition module, just like the SERT does with EFI ECMs, so don't buy a used one, it's already married to another IM.

32704-01  was the SE Pro Adjustable map ign system for 99-03 carb'd models. Came with an IM, and you could select 1 of 4 curves, and could advance or retard the entire curve.

It's the one that comes with a plug in remote fob programmer, for a 00' tc. Sets initial advance up to six degrees and 4 curves plus the rev limiter.

Is this the description for 32704-01?
Title: Re: SE adjustable ignition part number.
Post by: 14Frisco on August 03, 2019, 01:05:23 PM
Quote from: 838 on August 03, 2019, 10:49:28 AM
Is this the description for 32704-01?

Here are the instructions for 32704-01: SCREAMIN' EAGLE SELECTABLE MAP IGNITION SYSTEM (https://serviceinfo.harley-davidson.com/sip/content/document/view?id=1249)