HarleyTechTalk

Hi All- I decided to change my own tires so I didnt have to deal with the busy bike shop! I got the new tire on the new rim,and filled it with a burst of 100 psi! I was waiting to hear the pop of both seats but never happened!I put the valve back in and filled to 41 psi. My concern is about not hearing the pops! The tire looks good like it seated evenly all around the rim. I sprayed soapy water on both sides of the tire and didnt see any bubbles on either side. Can I assume that the tire is good to go? Some have said that some tires dont make the pop, but they are seated. What are your thoughts? Should I trust that its good to go? Many thanks in advance- Chas

Using Fueling on my 124
S&S on my 113
Stock B lifters on my 2000

No issues on any of them.
JME

Any brand can have their failures, pick a reputable company, QA likely better there.

Hello, and Welcome from Connecticut, USA.

Welcome from Ohio in the USA. I've been to Amsterdam about 12 years ago. Very pretty country.

Howdy, welcome from Montana, USA

Like you, I've seen many misprints in manuals over the years.😡

Welcome from Alberta, Canada

Welcome from Texas!!

Welcome,
Proper background for your picture!