Looked in my service manual to see if it identified the "stock" cam on a 2013 Deluxe. No luck. So, can anyone enlighten me as to what is the "stock" cam installed at the factory? What characteristics does the cam have etc? Thanks.
Stock cam specs for your bike is as follows- -12° Intake open/30° close, 38° Exhaust open/04° close, 0.525" lift all lobes. No overlap, mild ramps, designed to pass EPA/CARB emissions tests, provide adequate power, be relatively quiet, and durable. Referred to as the "1 dot/2dot cams", as the lobes had dots stamped in them for easy identification.
:up: Thanks Rigidthumper, that's what I was looking for. :wink:
I'm probably wrong,but I thought the lift is .505
"rigidthumper" pretty much nailed it... but I like pictures, easier for me to compare...
This is from the "Big Boyz" website...
(https://live.staticflickr.com/65535/51355894850_af3ccdb50a_c.jpg)