It seems that once again the button cover on the right turn handle bar switch is gone. Over the years I've tried super glue (be careful or you'll be replacing the switch), epoxy, shoe-goo, 3m weather strip glue, silicone, I could go on and on. Has and elese had this problem or s it me. What are you guys doing :banghead:
You have to find OEM ones as the aftermarket useless.
I use JB-Weld for plastic. Seems to hold them on OK, have not lost one so far. And these are aftermarket.
-JW
The little head on the tip of the switch plunger can wear down too.