Text only | Text with Images

HarleyTechTalk

Technical Forums => Milwaukee-Eight => Topic started by: anthonyflhx on January 16, 2021, 05:56:06 PM

Title: Anyone use the HHT cam remover/ install tool for m8
Post by: anthonyflhx on January 16, 2021, 05:56:06 PM
Has anyone used the HHT cam bearing remover/ installer tool? Is this the one that stops dead on during bearing install or do you have to measure back and forth so you don't press past the inner lip?
Title: Re: Anyone use the HHT cam remover/ install tool for m8
Post by: Rokinrider on January 18, 2021, 06:17:44 PM
I purchased one off Flea bay, it stated the depth was the shoulder on the tool? I measured mine before and after to make sure it was real close and it was. 9k on the new RS 468 and no issues.
Title: Re: Anyone use the HHT cam remover/ install tool for m8
Post by: bxbutch on February 02, 2021, 06:26:37 AM
how do i contact Georges Garage Thanks Butch
Title: Re: Anyone use the HHT cam remover/ install tool for m8
Post by: Ohio HD on February 02, 2021, 06:54:48 AM
Google "Georges Garage".
Text only | Text with Images