Text only | Text with Images

HarleyTechTalk

Dyno & Tuning Zone => AFR & Tuning Zone => Topic started by: HV on October 11, 2019, 01:26:59 PM

Title: Advice on cam for SE Tire Shredder
Post by: HV on October 11, 2019, 01:26:59 PM
A Buddy of mine has a 2013 CVO with a 117 SE Tire Shredder kit.... 259 Cam....58 MM TB   5.3 Injectors High low heads...   It works great and has a load of power from 3500 up... He would like more low end off throttle ...top end is not a big deal for him.... Ive been told a SE 585 may work good...any suggestions ?   Tuning with a PV
Title: Re: Advice on cam for SE Tire Shredder
Post by: Ohio HD on October 11, 2019, 04:58:05 PM
What kind of static compression does that have Brian? TTS-150 might be his cams.
Title: Re: Advice on cam for SE Tire Shredder
Post by: HV on October 11, 2019, 06:19:39 PM
Ill have to check it next week...hes going to drop it off  :up:
Title: Re: Advice on cam for SE Tire Shredder
Post by: HV on October 11, 2019, 06:29:51 PM
I think HD advertises it at 9.9:1 or so
Title: Re: Advice on cam for SE Tire Shredder
Post by: Ohio HD on October 12, 2019, 05:54:31 AM
Sent you a PM.
Title: Re: Advice on cam for SE Tire Shredder
Post by: HV on October 12, 2019, 08:45:48 AM
 :up:
Title: Re: Advice on cam for SE Tire Shredder
Post by: Don D on October 12, 2019, 09:18:14 AM
The 585 is a better choice keeping it HD for the goal. When I do head work for those builds we go up a point in compression and then they shine. That said the 259 is not the best cam in that duration of cams for the build, especially when the customer wants a big torque curve. Of course pipe is a major influence too, but that goes without saying.
Title: Re: Advice on cam for SE Tire Shredder
Post by: HV on October 16, 2019, 12:44:01 PM
Update.....


Installed 585s   Loaded a Base Map from DJ   Tuned with a few PV auto Tune runs .....   WOW   new bike ... :up:
Title: Re: Advice on cam for SE Tire Shredder
Post by: Ohio HD on October 17, 2019, 06:12:51 PM
 :up:       :chop:
Text only | Text with Images