Quote from: rigidthumper on Today at 08:03:07 AMYou can buy the components and use them in your cases...
Quote from: rigidthumper on Today at 05:33:04 AMGetting a license may be less of a pain?
If they have the VCI that is married to that bike, it can be made to work. Is it the SE Pro Supertuner, or the SE Street Tuner?
You can go into file manager, and edit the last update time, to over ride the "check for updates".
Quote from: rigidthumper on Today at 07:48:48 AMIf not, I have a working copy of the software- you're welcome to pop by with the VCI/bike/laptop & we can get you going.
Quote from: SP33DY on Today at 08:00:26 AMI tried a few things that didn't work!Exactly how I did it after a few days of wrestling with plastic razor blade scrapers and carb cleaner, it went on the lathe.
Now when I get an Evo cylinder with baked on gaskets, I use a mandrel to hold the cylinder in the lathe and carefully skim it off. Often when I do this I find out that the base is no longer flat. There are areas that didn't "clean-up" once the gasket is mostly gone. It usually only takes a skim of a few thousandths of an inch to restore the whole base to flat. It's faster to do it this way than with the old Trock lapping plate. Going back together, I like to install oil drain pigtails (V-Twin 16-0912). To tap the drain hole I use a spiral flute "drill tap" (McMaster Carr 3464A21 or 2748A47). The drill tap is a close fit in the hole so the tapping operation is straight.
drill tap 1
drill tap 2
Quote from: CraigArizona85248 on Yesterday at 08:22:58 PMBoth sets have small cracks in the return oil gallies that allow oil to just sleep through to the outside of the heads. I decided they just aren't worth sinking more money into them.
Quote from: rigidthumper on Today at 05:33:04 AMGetting a license may be less of a pain?
If they have the VCI that is married to that bike, it can be made to work. Is it the SE Pro Supertuner, or the SE Street Tuner?
You can go into file manager, and edit the last update time, to over ride the "check for updates".
Page created in 0.044 seconds with 17 queries.