April 30, 2024, 06:35:01 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


Considering a 2007 Springer Softail

Started by dubepj, April 30, 2019, 04:09:01 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dubepj

Always liked the way a softail springer looked. Found one with only about 7000 miles. I know the Touring bikes have compensator issues. I heard the Softail models don't have that problem, Is this true?? please enlighten me. Thanks

Blazing Saddles

Myself and several friends ride Springers and none of us has had any compensator issues.

tbird

Thats interesting.  The part number for the compensator is the same for both the touring and the softails.  Could it be the softails don't get the miles on them?   

kd

Quote from: tbird on April 30, 2019, 06:47:19 PM
Thats interesting.  The part number for the compensator is the same for both the touring and the softails.  Could it be the softails don't get the miles on them?


It is the same comp.  Some softail owners reported problems when they were first failing lots.  Hard use and luggers had the most problems on average.  Primary lube was a huge part of the problem.
KD

FSG

an 07 has the comp with the spring pack bucket welded on to the rotor

if I was to get a bike with that comp it'd be the first thing I changed out

I'll find the pix from my mates 07 Fatty where the comp self destructed

he was going to spend huge and put in a SE Comp BUT OhioHD helped me out

sending me the old comp out of his 08 Tourer 

IronButt70

Are the compensaver trays still available? Looks like this would be a good candidate for one.
No one else put you on the road you're on. It's your own asphalt.

MikeL

I have a 2007 Ultra Classic. I also had those concerns. I also looked into replacing it because it was clunking. I bought this bike used with 5200 miles last July.
I went into the primary for an inspection. The primary chain was as tight as a banjo string. Removed the H/D self adjuster and in stalled a manual adjuster thanks Cali Phil. There was no metal on the drain magnet. I figure the comp sprocket is good. So the cover goes back on. Filled with Amsoil Torque Drive ATF. I also overfilled it by 8oz. to aid in comp sprocket lubrication.
It's a night and day difference. No more noise, and shifts better. At a stop with the clutch engaged no dragging and neutral is easily engaged at any temperature.


                                                                                                      MIKE

Arseclown

Quote from: tbird on April 30, 2019, 06:47:19 PM
Thats interesting.  The part number for the compensator is the same for both the touring and the softails.  Could it be the softails don't get the miles on them?

There have been issues across all models but I suspect it occurred more in tourers because of the extra weight.

FSG

not the super destructive pic I was looking for but it should get the point across

You can see in the below pic that the springs wear into the cup and sometimes wear right through it to the point the cup sheds a section that then gets chewed up by the primary chain.



Check the other comp components for wear.





rredneckn2

If you don't like what I say DONT read it