May 05, 2024, 03:53:34 AM

News:

Recent posts

Pages1 2 3 ... 10
1
Shovel Head / Re: Belt drive toasted
Last post by 76shuvlinoff - Today at 03:44:58 AM
Quotethis was one of the nicer shifting shovels I have owned and it was a piece of cake to find neutral

 I advocate for a chain but the truth is I've never had a belt drive primary.

  My 76 shifts almost silently since I went to the Rivera Pro Clutch.  To hit neutral at a complete stop I do very slight blip. Sometimes I think that's as much old habit as anything.  It's night and day compared to my 12.  :angry:
2
General / Re: 2013 FLTRX tank removal
Last post by Coyote - Yesterday at 06:50:14 PM
Just disconnect it.
3
Milwaukee-Eight / Not really Neutral
Last post by genzer - Yesterday at 05:13:39 PM
Just bought a 21 rgs, when trying to back off a tilt bed trailer in neutral it acts like it's in gear pulling in the clutch helps a little. And when starting it "in neutral" it jumps forward, thoughts?
4
General / Re: 2013 FLTRX tank removal
Last post by harleywillie - Yesterday at 04:40:07 PM
I believe I have a memory stick with many service manuals from 1995 to 2013. Moved twice, going to be a chore to find it, but I think I can do it.
5
Milwaukee-Eight / Re: 2019 M8 Rear head gasket l...
Last post by Stellier - Yesterday at 03:58:32 PM
Our tech has replaced about 10 rear head gaskets on 2019 models
6
General / Re: Stock clutch spring
Last post by Hossamania - Yesterday at 02:55:11 PM
I'm assuming this is it

https://harleytechtalk.com/htt/index.php/topic,34648.0/all.html
7
Twin Cam / Re: Help identifying pistons
Last post by Cracked Head - Yesterday at 02:51:35 PM
The S&S pistons for the 97 or 98 3.928 and 3.938 domes are very close and will work verified by clay checking with .040 head gasket.
8
General / Re: 2013 FLTRX tank removal
Last post by kd - Yesterday at 02:02:49 PM
Do you have the Harley factory service manual?  It will give you the procedure. You may have missed something.
9
General / Re: M???? in the section
Last post by FSG - Yesterday at 01:44:38 PM
TT467         2019-09-27

TT465         2019-04-23

M1631        2024-02-20
10
EVO 1340 / Re: KB hyper cyl to wall
Last post by jsachs1 - Yesterday at 01:41:48 PM
KB HYPER = .0015".
John
Pages1 2 3 ... 10