A friend is putting CR570-2 cams in his '12 Ultra, 103". He currently has the FP-3, and will be changing to a Power Vision or TTS, depending on what the Dyno tuner prefers.
He searched the tunes available, no CR cams listed for a tune on the FP-3 website, is there a cam that might be close that he could use for a few days to get him by until it gets tuned? He has called Vance and Hines, waiting for a call back, and will send an email. Just wondering if another choice might work, such as S&S570, or ?
He has found out, of course, that the FP-3 was not an ideal choice, but was "good enough" for the stock motor and new exhaust. Cams were not in the plan, until they were.
Is the Crane 300-2 on FP3?
Handy list (http://www.nightrider.com/biketech/hdcamsspecs.htm#cams)
Quote from: rigidthumper on June 20, 2020, 07:09:41 AM
Is the Crane 300-2 on FP3?
Handy list (http://www.nightrider.com/biketech/hdcamsspecs.htm#cams)
He will be checking this morning.
Note the FP3 base maps are not actually developed by putting most of these cams in an engine then testing/developing the tunes. In many cases they are simply inputting the appropriate IVO/IVC in the base tune and letting the end user develop the VE & spark tables.