Anybody out there have a manual for a 96 heritage softail that could send a picture of the rear axle spacers and washer diagram would really be appreciated!
This may help
LINK (https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?Type=13&make=hdmc&a=228&b=27&c=0&d=1996%20FLSTC%20HERITAGE%AE%20CLASSIC%20(BJ)%20WHEEL%20-%20REAR%20WHEEL%20ASSEMBLY%20W/%20BRAKE%20DISK%20AND%20SPOCKET)
Thanks I was already on that site, little confusing. There are 2 washers that came with the axle kit the guy ordered. They were down in N.C. and the axle spun and broke the adjuster bolts off. He ordered and had the kit overnighted from jp. I know which spacers go in the seals and thelong spacer on the pulley side. There was 2 washers that came with the kit. One is about 2" with a 7/8" hole in it. then there is another smaller one 3/4" hole and about an 1/8" thich. The smaller one almost looks like a spacer. Had to order bearings and new spacers. 5 GUYS WORKING ON IT AND NEVER EVEN GIVE IT A THOUGHT THE WHEEL BEARING WENT OUT??
Quote from: roadkingdresser on July 27, 2021, 02:52:39 PM
Thanks I was already on that site, little confusing. There are 2 washers that came with the axle kit the guy ordered. They were down in N.C. and the axle spun and broke the adjuster bolts off. He ordered and had the kit overnighted from jp. I know which spacers go in the seals and thelong spacer on the pulley side. There was 2 washers that came with the kit. One is about 2" with a 7/8" hole in it. then there is another smaller one 3/4" hole and about an 1/8" thich. The smaller one almost looks like a spacer. Had to order bearings and new spacers. 5 GUYS WORKING ON IT AND NEVER EVEN GIVE IT A THOUGHT THE WHEEL BEARING WENT OUT??
Thought it would be worth a try. I have manuals way before that year and 2001. FLT Well.. We'll bump it up any way.
Thanks.