Can someone post a pic of camplate/Oil pump torque sequence ? Or even instructions from manual.its been awhile and can't remember. In Sturgis and sons bike is down and I'm trying to get it back together for the ride home.
Start at 40 in. lbs., then 80 in. lbs,. then finally 120 in. lbs.
(http://www.wildwestcycle.com/p-camplatebolts.jpg)
Hope this helps.
Remember that if the two positions where the dowels are located have not been converted to studs, they are very susceptible to pulling the threads. DO NOT over torque them. Clean all of the oil out of the holes to prevent any hydro lock also. Good luck on your repair.
Remember, we cannot post copywritten pics. The sequence is a cross pattern starting with lower left plate fastener.
Quote from: rigidthumper on August 13, 2021, 09:45:04 AM
Remember, we cannot post copywritten pics. The sequence is a cross pattern starting with lower left plate fastener.
oooops
Doesn't mean you couldn't hand draw one real quick and take a picture.
Quote from: Hossamania on August 13, 2021, 02:18:38 PM
Doesn't mean you couldn't hand draw one real quick and take a picture.
or post a link to a picture that is hosted elsewhere .... imgur as an example
(https://imgur.com/hxYdCVt.png)
Quote from: FSG on August 13, 2021, 02:48:43 PM
Quote from: Hossamania on August 13, 2021, 02:18:38 PM
Doesn't mean you couldn't hand draw one real quick and take a picture.
or post a link to a picture that is hosted elsewhere .... imgur as an example
(https://imgur.com/hxYdCVt.png)
Yeah, I'm still working on that skill.
or send a PM ? Never about that copy right thing.. Figured I own that manual and I paid for it... I know Wrong again... LOL