Hey guys , I have a 95 buell in the shop and need to adjust the belt could someone give me the spec's please and thanks!!
found some specs.
but which model/? blast??
1995 S1 lighting
hell, cant find site. had a line drawing with all the stuff.
but anyway
the gist of it is
1.5-1.75 in. (38.1-44.5 mm) deflection with 10 lbs (4.5 kg of upward force)
applied to center of lower span. Measurement must be taken with rear suspension
fully unloaded. NOTE: The rear suspension is considered fully
unloaded when the motorcycle's weight is not compressing the rear shock. It
is not necessary to raise the rear wheel off the ground to reach this point.
oh also those couple years had a recall for broken swing arms.
here is link..
http://www.buellx1-li.ch/Buell%20Recall-Liste/Buell%20Service%20Bulletin%20B-25A%20-%20B025A-263572.pdf (http://www.buellx1-li.ch/Buell%20Recall-Liste/Buell%20Service%20Bulletin%20B-25A%20-%20B025A-263572.pdf)
thanks Gary that will work !