March 28, 2024, 06:00:10 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


Recent posts

Pages1 2 3 ... 10
1
Audio and Electronics / Re: DTC U1405h ?
Last post by HogMike - Yesterday at 03:54:51 PM
Quote from: FLSTFIDave on March 26, 2024, 06:22:13 AMOn my 2019 CVO RG I had an issue with my bike having intermittent issues with Carplay.  I eventually bought a new iPhone to bike usb cord.  Never had an issue again.  The old cord has been in my corvette for 3 years now, never once an issue.  I sure cant explain it.


Thanks, I thought about that as well and got a new cord in there and will do a ride to see if the code will stay away!
I got a couple of spares in my pizza box I'll share with my friends.
2
General / Re: Pro Action Suspension
Last post by brent - Yesterday at 12:21:39 PM
biggzed did you ever have any clearance problems with the 11 inch shocks
3
General / Re: JET boring 2005 OEM thrott...
Last post by blown alcohol - Yesterday at 12:10:08 PM
I have the Kurykayn throttle body and spacer on the way.

What is a good air cleaner to pair with it?
Big sucker or screamin eagle?
4
General / Re: M???? in the section
Last post by FSG - Yesterday at 09:25:34 AM
L1012       2024-03-21
5
General / Re: Lifters
Last post by IronButt70 - Yesterday at 06:44:50 AM
Quote from: JSD on March 25, 2024, 09:03:23 PMAlways use koyo full roller
Always had good results with Torringtons too.
6
General / Re: shrader under tank?
Last post by ziggy24 - Yesterday at 03:12:12 AM
Looks like a refrigeration schrader.
7
General / Re: Fly by wire module replace...
Last post by rigidthumper - March 26, 2024, 07:12:20 PM
2008-2010 were the thicker bodies.
8
General / Re: JET boring 2005 OEM thrott...
Last post by blown alcohol - March 26, 2024, 05:55:23 PM
Quote from: jsachs1 on March 26, 2024, 02:04:43 PMIIRC, Mike epoxied the manifold area spacers on the 57 mm Kury throttle bodies. I have that TB on my 05' CVO Electra Glide, and will check. Jims machining sells spacers. Check with them on bolt pattern, and dimensions.
John

John let me know what you find when you can look at the throttle body on your bike.
What do these spacers clear whne used on touring model? Are they really needed is the question?
9
General / Re: JET boring 2005 OEM thrott...
Last post by jsachs1 - March 26, 2024, 02:04:43 PM
IIRC, Mike epoxied the manifold area spacers on the 57 mm Kury throttle bodies. I have that TB on my 05' CVO Electra Glide, and will check. Jims machining sells spacers. Check with them on bolt pattern, and dimensions.
John
10
General / Re: Fly by wire module replace...
Last post by jsachs1 - March 26, 2024, 01:51:51 PM
Quote from: Shep236 on March 25, 2024, 06:42:09 PMOk thanks.  I wanna buy a cheap gutted one to port match to these heads I bought and just swap guts and go when I go to build the top end.  An intake manifold from an 11 electra should fit my 09 right? 
You need to be careful. Some of the later ones were very thin in some areas. I have a some cores, and if I get a chance, I will try to figure out the years of the bad ones.
John
Pages1 2 3 ... 10