11
General / Re: front plug is black rear i...
Last post by chas - Yesterday at 05:22:44 AMIf the intake seal was leaking wouldn't it be more likely to run lean rather rich? Plug is not wet just blackened. If the injector wire was loose what would be the fix?
12
Shovel Head / Re: Motor mount bolts
Last post by hanger - Yesterday at 03:04:54 AMThanks guys. Much appreciated.
13
General / Re: front plug is black rear i...
Last post by rigidthumper - May 06, 2024, 07:08:59 PMI'd replace the intake seals & verify the injector wiring is intact.
14
General / front plug is black rear is wh...
Last post by chas - May 06, 2024, 06:14:43 PMMy front plug on 03 Ultra is running black and rear is white. Im getting a stutter running at 40 mph. Im running an improved stock map on power vision. When adding 3% fuel I'm getting less decel pop. Any thoughts? Thanks in advance
16
Twin Cam / Re: 09 - 103 heads
Last post by Ohio HD - May 06, 2024, 05:14:04 PMMost are about 86cc +/-
17
Twin Cam / 09 - 103 heads
Last post by RK103 - May 06, 2024, 05:02:35 PMwhat are the cc's of stock 09 - 103 heads?
18
Milwaukee-Eight / Re: 2019 M8 Rear head gasket l...
Last post by TXHogrider - May 06, 2024, 07:56:39 AMI had the same thing happen to my 2019 Street Glide special. Happened early enough that the dealer replaced it under warranty.
19
Shovel Head / Re: Motor mount bolts
Last post by Fugawee - May 06, 2024, 05:05:18 AMQuote from: CraigArizona85248 on May 05, 2024, 07:36:04 PMChevy starter shims.
Me too...as well as making up a couple out of a Beer Can back in the day.
20
For Sale Items / S&S Flywheels for sale
Last post by topcat3815 - May 06, 2024, 12:02:14 AMS&S 4.375 stroke fits 07 thru 16 twin cam A engines in perfect condition with 1400 miles on them decided to go to 124 engine need 4.635 stroke flywheels. $1000.00 plus freight located in N.C.
You cannot see attachments on this board.
You cannot see attachments on this board.
You cannot see attachments on this board.
You cannot see attachments on this board.