bolt in cam for 96in

[1stop]

been searching the threads for opintions on good bolt in cam for stock 08 96 in. looking for great bottom torque. seen andrews 26 came up alot,but these threads are pretty old. wondering what the lastest and greatest has to offer,if anything. i know s&s 509 are good for 88 stuff. thanks

[fidel]

Andrews 48 for a stock 96

[Durwood]

SE 255 or CR-570-2

[MikeL]

I had 3 cams to choose from for my 2007 ultra. Andrews 48,57 and SE255. I chose the 48. So far so good. If your keeping your bike stock the 48 works great as would the 255. The Andrews 57 is just like the Andrews 37 with higher lift. I had Andrews 37cams in my 2k RKC. It performed better with a compression bump and head work.
If you intend to perform more performance work like a  bore kit in the future then install an Andrews 57. 

                                                                                                       MIKE

[838]

I've always been curious why an S&S 583 never gets mentioned?

Andrews 48 was great in my 96" flhx... after it was tuned right.

[tc1550]

cr-570-2 woods 222  tman torqster 555 all good choices

[Hossamania]

I forgot about the 555, that always had good reviews.

[Tail Ridr]

I've always been curious why an S&S 583 never gets mentioned?

Spent a lot of time searching, wondering the same...but I've gotten past it with other choices currently offered and before the HO came out in the Rushmore

[PBSTN]

I had Andrews 48's in my 10 road glide. Great cams. And very affordable. I now have a set of s&s 551 easy starts waiting to go in my 10 road king. I hope they are as good as the 48's.

[BVHOG]

A couple years back I tuned 3 96 inch motors back to back, one with an SE 255, one with an Andrews 48 and one with an S&S 551 and I have tuned many other bikes with these cams over the years. If I were forced to ride a 96 inch bike with just a cam swap and tune etc. I would pick the 551 not based on dyno numbers alone but on SOTP riding and the nasty idle. You don't need the easy start feature of the 551 in a 96 either.

[No Cents]

   I bought the old Duracell new back in 2008 with a 96" engine.
It didn't take me long to want more power. My first step in the saga of that bike was I put in a set of Andrews 37 cams. They pulled good and sounded good too.
   Surprisingly the bike ran pretty darn good with that cam swap.
From there...I just went crazy.   

[1workinman]

   I bought the old Duracell new back in 2008 with a 96" engine.
It didn't take me long to want more power. My first step in the saga of that bike was I put in a set of Andrews 37 cams. They pulled good and sounded good too.
   Surprisingly the bike ran pretty darn good with that cam swap.
From there...I just went crazy.   

I had a 96 inch bike and it was a road king . I did not care for the no radio , cruse or fairing , it was a very reliable motor . if I had of installed a decent cam in it and never ran across this web sight to see bikes like Rays that only make me want one damn I could have saved a some money.  There is no turning back now but I do think that a cam , tune pipe in the 96 inch would have been ok back then if I never seen this sight and finally got a chance to Ride a decent running Harley . One of the best running 96 inch I seen is the one Jim did a while back . He did test the heck out of it . 

[86fxwg]

255's work Dam good in a 96 & there dirt cheap! Used of course!

86

[838]

255's work Dam good in a 96 & there dirt cheap! Used of course!

86

I've "heard" the same thing about the 103" HO cams from the Rushmore bikes in a 96". Very cheap... sadly no data to support this claim.

[tdrglide]

I ran SE 204 cams in a 96" 2009 street glide. Ran really well. SE air cleaner, full-sac 2-1-2 exhaust and a good tune. Otherwise stock. Don't remember the numbers but it was fun in the canyons. Nice idle too.

[TorQuePimp]

Somewhat depends on the pipe

Comp 3101/48h Andrews

Can grow with either.....a little

[Justpassingas]

I've been running Andrews 48 in my 09SG with SE heavy breather & VH Propipe with a dyno tune...works for me

[Hossamania]

I'd like to ride a 96" with a 204, I like that cam. Works ok in an 88", I'll bet it's better in a 96".

[Otter656]

I put a set of 48's in my '11 RGC last year, stock 96. Very happy, torque is much improved from idle to well north of 4k, as many people say they really woke the engine up. It took awhile for the Thundermax to autotune it in and I almost gave up, but now its been worth it, and as I hear, the 48's need a good tune to perform. I also run a 2-1 pipe w/ removable discs; that has been a great help in dialing in the torque curve. Good luck on your decision, you probly will be happy with any "torque" cam mentioned here.

Otter

[black]

I'd like to ride a 96" with a 204, I like that cam. Works ok in an 88", I'll bet it's better in a 96".

I run 204 in a 96 with a power vision tune and and white brother e pipe with 02 bungs welded in. It works nice, sounds nice,and pulls good even two up,It is a Fun ride with a Pingle electric shifter

[Propflux01]

Another vote for the '48. After I went up to 103, it became simply a blast to ride.

[motolocopat]

What cam has same base ramps so no adjustable pushrods needed to keep cost down and then possibly allow doing a 103-107"BB?

[838]

What cam has same base ramps so no adjustable pushrods needed to keep cost down and then possibly allow doing a 103-107"BB?

I was thinking this same thing. Someday (if it were my bike) I'd wanna go 96-107/110 and I'd think the CR570 would be my choice if staying with stock heads.

FYI I have installed an andrews48 on a 96" with stock pushrods.

[PoorUB]

The CR-570-2 works fine with stock pushrods, right in the middle of the lifter travel so it will handle a few thousandths milled off the head.

[thumpr54]

I put 551s in my 2009 96" Road King...road tuned with TTS....no complaints...like said earlier the sound at idle much improved. It's only a stage one and I didn't spend a ton on a pipe...you hear the compression releases when you shut it down but no biggie....S&S says that's normal....