Print Page - Feuling Go/No Go lifter bore measuring balls

Title: Feuling Go/No Go lifter bore measuring balls
Post by: egstandard on September 26, 2019, 08:38:26 AM

Has anyone ever used these for checking the bores?

Title: Re: Feuling Go/No Go lifter bore measuring balls
Post by: SP33DY on September 26, 2019, 09:02:16 AM

You can do the same thing much more cheaply with pin gages. I use them for quick checks to see if things are within service limits. If further investigation, machining, honing, or fitting is needed, I use Sunnen Dial Bore Gages.

https://www.mcmaster.com/gauge-pins (https://www.mcmaster.com/gauge-pins)

Title: Re: Feuling Go/No Go lifter bore measuring balls
Post by: egstandard on September 26, 2019, 11:27:36 AM

Thanks for that. Way cheaper.

Title: Re: Feuling Go/No Go lifter bore measuring balls
Post by: les on September 26, 2019, 12:02:23 PM

I've got a set of those balls, but have not used them yet. I'm also interested if anyone's used them and how they like them, or not.

HarleyTechTalk

Technical Forums => General => Topic started by: egstandard on September 26, 2019, 08:38:26 AM