Looking for exhaust header form my 2014 street glide.
Currently running stock header with V&H slipons and SE ventilator AC with Power Vision.
Collecting everything to go to stage II. I have the cams/lifters and now need to choose a header. I don't like the looks of the left side with a 2:1. And I can't justify the $1,600 for the Billet Cat with ghost pipe, otherwise I'd go that route.
I just ran across the D&D X-Cat but cant find many reviews on it. I called D&D and verified pretty much any Rushmore mufflers will fit. I like the looks and it ceramic coated, Its not really an X-Pipe and not really true duals.
Any one have any experience with this pipe?
I run this head-pipe on my LTD, nothing short of excellence expected from D&D
It preforms, fit & finish is top notch :up:
https://danddexhaust.com/09-16touring-x-cat-2-2
https://www.cyclesolutions.com/product/csrcyclesolutionsracing-csrcrossoverheaders/
Here is a very similar pipe
Not much for results for either
Quote from: Tommy D on May 25, 2020, 06:10:13 AM
I run this head-pipe on my LTD, nothing short of excellence expected from D&D
It preforms, fit & finish is top notch :up:
https://danddexhaust.com/09-16touring-x-cat-2-2
It Commands quite a price, as well, against other 2-1-2 systems...any dyno on this for results?
Quote from: TorQuePimp on May 25, 2020, 08:11:24 PM
https://www.cyclesolutions.com/product/csrcyclesolutionsracing-csrcrossoverheaders/
Here is a very similar pipe
Not much for results for either
Have never seen this one, at least its ceramic coated!
Quote from: Tail Ridr on May 26, 2020, 02:42:03 AM
Quote from: TorQuePimp on May 25, 2020, 08:11:24 PM
https://www.cyclesolutions.com/product/csrcyclesolutionsracing-csrcrossoverheaders/
Here is a very similar pipe
Not much for results for either
Have never seen this one, at least its ceramic coated!
The D&D is ceramic coated as well. I looked at the cycle solutions as well but I don't know much about them.
It's the same pipe, here's a picture of the x-cat to compare
One from the dyno section:
http://harleytechtalk.com/htt/index.php/topic,100377.0.html
Also here's an x-cat/crushers vs boss fatcat (louvered) on a TC107 with S&S 570's, budget ported heads, red line is x-cat
Quote from: Pepe48134 on May 26, 2020, 10:56:52 AM
Quote from: Tail Ridr on May 26, 2020, 02:42:03 AM
Quote from: TorQuePimp on May 25, 2020, 08:11:24 PM
https://www.cyclesolutions.com/product/csrcyclesolutionsracing-csrcrossoverheaders/
Here is a very similar pipe
Not much for results for either
Have never seen this one, at least its ceramic coated!
The D&D is ceramic coated as well. I looked at the cycle solutions as well but I don't know much about them.
When I saw the price, my first thought was "at least its ceramic coated" ...the reason for my statement
Thanks guys.
Quote from: Tail Ridr on May 26, 2020, 02:40:09 AM
Quote from: Tommy D on May 25, 2020, 06:10:13 AM
I run this head-pipe on my LTD, nothing short of excellence expected from D&D
It preforms, fit & finish is top notch :up:
https://danddexhaust.com/09-16touring-x-cat-2-2
It Commands quite a price, as well, against other 2-1-2 systems...any dyno on this for results?
Here's the graph for my 107 Bob (BVHOG) from Razorback Performance installed in my '14 LTD
Running D&D X w/FullSac 4" mufflers with 1.75 baffle
[attach=0]
What cams did you use on this build?
Quote from: harpwrench on May 28, 2020, 08:44:38 AM
Quote from: Tommy D on May 28, 2020, 07:24:11 AM
Quote from: harpwrench on May 26, 2020, 08:52:52 PM
What cams did you use on this build?
Comp 3103
Good job, thanks-
Sure thing,,
All the thanks goes to Bob @ Razorback... it's very street able, runs like a raped ape, runs on pump gas. couldn't be happier :up:
Good build there. OK so 1.75" cores on what mufflers? CVO?
Quote from: HD Street Performance on May 28, 2020, 10:24:06 AM
Good build there. OK so 1.75" cores on what mufflers? CVO?
Don,
These are FullSac 4" slip on's for Twin Cam... I checked Steve's website & they are no longer listed
Oh i see interesting, thanks