Hi All,
Looking for thought's & experience with different set-ups
Running a Belt conversion primary, looking at Energy One BTX-5 (extra plate/10 springs) set -up
any other suggestions
Greg
Quote from: yobtaf103 on August 05, 2019, 12:54:13 PM
Hi All,
Looking for thought's & experience with different set-ups
Running a Belt conversion primary, looking at Energy One BTX-5 (extra plate/10 springs) set -up
any other suggestions
Greg
In my 49 pan I installed the Barnett extra plate with stock hat and springs.
My 65 with a bigger motor I used the same hub but extra plate, 5 finger clutch with stiffer springs, still slips just a little when I abuse it.
:idunno: