Print Page - Can you reset a lean angle sensor in the BCM

Title: Can you reset a lean angle sensor in the BCM
Post by: pendo31 on May 18, 2019, 01:40:08 PM

I have a 2018 softail that fell over and wont start. It threw a few codes that were cleared and it still wont start. I thing it might be the lean angle sensor. Is there any way to reset it? Thanks

Title: Re: Can you reset a lean angle sensor in the BCM
Post by: HV on May 18, 2019, 02:36:25 PM

Normaly once its right up cycle the key on and off a few times will reset the BCM

Title: Re: Can you reset a lean angle sensor in the BCM
Post by: harttoo on May 18, 2019, 05:04:53 PM

Lean angle sensor resets with cycling the ignition switch.What were the cleared codes?Was the left or right control packs hit?

Title: Re: Can you reset a lean angle sensor in the BCM
Post by: pendo31 on May 19, 2019, 07:55:51 AM

It ended up being a fuse. It's funny how this started after the bike fell over. Thanks for the replies.

HarleyTechTalk

Technical Forums => Milwaukee-Eight => Topic started by: pendo31 on May 18, 2019, 01:40:08 PM