March 29, 2024, 06:32:20 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


KB FORGED PISTONS

Started by wfolarry, February 19, 2016, 03:16:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

wfolarry

I am now a distributor for KB pistons.   https://www.uempistons.com/index.php?main_page=index&cPath=7
They have a nice forged piston that is reasonably priced.
They also offer coated skirts by Line2Line    https://www.line2linecoatings.com/
This coating goes on thicker than others & is designed to wear in so clearances are kept to a minimum.
Soon they will be offering anodized tops & top ring groove. There is still some testing going on so it's a little ways off. More options for the builders.

joe_lyons

Are they going to have a 3.937 offering at some point?
Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901

wfolarry

I'm working on that. Right now they have a .030 over [3.905]. I'm trying to get them to go up to .060 over. I have the 110 pistons in .060, .065 & .070 oversizes. I'll post any updates.

Ohio HD

Larry, will they have pistons for 4.125" x 4.625" motors with 7.659" connecting rods?

wfolarry

Another one I'm working on. I make the suggestions then they take the idea to the higher ups for the decision. They decide if there's enough of a demand to make it. They don't do customs. If you have any takeouts you can send them to me & I forward it to them. If they have a blank they can make it from then the chances are better. I've been bugging them for quite a few years now. They're starting to come around.  :wink:

wfolarry

Quote from: joe_lyons on February 19, 2016, 07:48:57 PM
Are they going to have a 3.937 offering at some point?

Just got approval on this. It will be 10 - 12 weeks before they're available though.   :idunno:

joe_lyons

Well "Potty mouth" the bed,lol cool glad to hear
Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901

Just Nick

Quote from: wfolarry on February 22, 2016, 04:29:39 PM
Quote from: joe_lyons on February 19, 2016, 07:48:57 PM
Are they going to have a 3.937 offering at some point?

Just got approval on this. It will be 10 - 12 weeks before they're available though.   :idunno:

Real good to here I use a lot of the 105 .040 103 pistons
I'm never wrong , once I thought I was wrong , but I was wrong

wfolarry

Here's some pics of the 4.060 piston

[smg id=2664]

[smg id=2661]

Durwood


N456SK

Can you talk them into getting rid of those spiral wrist pin clips? 😀

wfolarry

Quote from: N456SK on March 10, 2016, 07:23:01 AM
Can you talk them into getting rid of those spiral wrist pin clips? 😀

One thing at a time.  :teeth:
Some guys actually like those.

joe_lyons

Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901

Just Nick

I like them they are easy breezy
I'm never wrong , once I thought I was wrong , but I was wrong

Yellow09SERG

Quote from: wfolarry on February 29, 2016, 05:13:16 PM
Here's some pics of the 4.060 piston

Larry what is the cc on the domes?

[smg id=2664]

[smg id=2661]

wfolarry


wfolarry

Some new part #'s for the coated pistons.
[smg id=2921]

wfolarry

The ones that are available now:
KB908LCA 103"
KB909LCA 103"
KB660LCA 103"
KB661LCA 110"
KB661LCA 113"
One step at a time......baby steps  :teeth:

wfolarry

They're starting to trickle in. The 107's haven't been released yet but they are testing them now in their shop bike. Here's some pictures of the 117's. Drag Specialties buys them as fast as they make them so if you're looking for them you can check there. I'm a distributor for KB but I don't have Drag's buying power. Hopefully they start stocking more part #'s so I can get my hands on them. Note the piston size on the underside of the piston. Add your clearance to this & bore/hone to size. The coating is about .010 thicker than the piston.

[smg id=3097]  [smg id=3098]  [smg id=3099]