I just took the first test ride after my Grudge Box install. Mechanically, working fine. But I've got a couple of problems.
1. The cruise control only works in 5th gear.
2. The 6 gear indicator light only illuminates in 5th gear, goes off shifting to 6th.
Search is your friend.
https://harleytechtalk.com/htt/index.php/topic,105065.msg1295549.html#msg1295549
Thank you, OhioHD. Do you know off the top if I can do this with my SE Pro Race Tuner (the orange module)?
Never used an SE unit. But I doubt it.
Shucks. Again, thanks for the reply.
I've been following this thread and want to buy the 56-5084 bearing race for my GrudgeBox. I didn't know I could use the S&S 56-5089 race and the OEM roller. I have a new roller but can't find the 56-5089 on the S&S site. It keeps kicking out the 06 up race no matter what I do. :banghead: I do not have my 2011 RGU in the "shop by bike" application. Anyone else have this issue? I would like to get one ordered. Maybe I should call them. :nix:
Correction: this was a miss post meant for the GrudgeBox inner primary bearing thread . :oops: It looks like Ohio figured it out though. :up:
I know a very modest Indy in Concordia Kansas that can hook you up.
https://www.dragspecialties.com/products/?productId=470396&partNumber=11200148
Thx Brian. I was thinking the same but didn't want to bother him over one small item. I guess if S&S wants to make it tough to buy ..... :nix: maybe I'll get a list up for some winter jobs.
It appears I posted my request on the wrong thread so while I'm here I might as well ask if anyone has the TTS values for the GrudgBox ratios that gets the cruise back. I also have 3.15:1 final ratio with my 49 ego basket and 24 / 57 drive sprockets. Will that have to be figured into the change? I'll have to rest the speedo accuracy too. I'm feeling a little bit challenged with this.