Print Page - OE Cam Specs

Title: OE Cam Specs
Post by: Deye76 on January 18, 2024, 09:26:06 AM

For 2012 Sportster. Search didn't find anything. Thanks.

Title: Re: OE Cam Specs
Post by: Ohio HD on January 18, 2024, 09:32:30 AM

(https://i.imgur.com/uA9CJRT.png)

Title: Re: OE Cam Specs
Post by: Deye76 on January 18, 2024, 10:08:06 AM

Thank You Brian. Was hoping to find the overlap.

Title: Re: OE Cam Specs
Post by: Ohio HD on January 18, 2024, 10:08:47 AM

Your welcome.

Title: Re: OE Cam Specs
Post by: aswracing on January 18, 2024, 01:38:24 PM

Quote from: Deye76 on January 18, 2024, 10:08:06 AMThank You Brian. Was hoping to find the overlap.

Overlap is the intake valve open (IVO) plus the exhaust valve close (EVC) point.

Note that the Andrews information on the stock "W" cams differs from the HD information:

(https://www.hammerperf.com/images/newsecamspecs.jpg)

Likewise, their information that D and W cams have the same specs is in error.

Title: Re: OE Cam Specs
Post by: jsachs1 on January 18, 2024, 02:12:42 PM

Here you go. 04 & later.

25740-05 Pro Sportster High Output 04 - Later
.575"/.575" lift. 260/266 duration In: 28 - 52 Ex: 57 - 29 degrees TDC Lift .228 in. .221 ex.

25197-04 Performance 04 - Later
.551"/.551" lift. 249/249 duration In: 25 - 44 Ex: 59 - 10 TDC Lift .197 in. .122 ex.

92 - 99 need to change pinion gear.
John

HarleyTechTalk

Technical Forums => Evo Sportster => Topic started by: Deye76 on January 18, 2024, 09:26:06 AM