Text only | Text with Images

HarleyTechTalk

Technical Forums => General => Topic started by: 67HD on January 05, 2009, 06:55:36 PM

Title: Crane Roller Rockers
Post by: 67HD on January 05, 2009, 06:55:36 PM
Opinion on crane roller rockers  vs others ?

                                         Thanks.
Title: Re: Crane Roller Rockers
Post by: hotham on January 06, 2009, 07:24:04 AM
When I pulled the heads on my stroker last time, I put a set of Crane roller rockers in.  If you run a cam with any kind of high lift, I think they should be used.  The odd push rod angles big twins have,  puts a strain on your valvetrain anyway.  Someone had asked about diamond cut heads.  This is by far a better place to spend your $400.
Text only | Text with Images