Print Page - Grudge Box for M8 ratios needed for Power Vision tuner.

Title: Grudge Box for M8 ratios needed for Power Vision tuner.
Post by: Chopsahoy on July 27, 2020, 07:42:00 PM

Hello. Haven't posted much. I just installed a Baker Grudge Box in my 2018 CVO Road Glide. I have a Power Vision tuner. I need to input gear ratio's in the tune so that my gear indicator and cruise control operates. I need the ratios. Anyone here able to help?

Title: Re: Grudge Box for M8 ratios needed for Power Vision tuner.
Post by: Ohio HD on July 28, 2020, 03:41:08 AM

Look at Joe's ratio value generator.

You'll need to know the current gear ratios, the gear ratios in the Grudgebox, and have the PV gear values for the OEM gear box from the OEM style PV MAP.

https://harleytechtalk.com/htt/index.php/topic,105065.msg1295549.html#msg1295549

Title: Re: Grudge Box for M8 ratios needed for Power Vision tuner.
Post by: ThomasT on July 23, 2024, 10:54:23 PM

Quote from: Ohio HD on July 28, 2020, 03:41:08 AMLook at Joe's ratio value generator.

You'll need to know the current gear ratios, the gear ratios in the Grudgebox, and have the PV gear values for the OEM gear box from the OEM style PV MAP.

https://harleytechtalk.com/htt/index.php/topic,105065.msg1295549.html#msg1295549

Any tips on where to enter the new values in the Dyno C3 tuning software for my PV4?

Title: Re: Grudge Box for M8 ratios needed for Power Vision tuner.
Post by: Ohio HD on July 24, 2024, 01:21:34 AM

I don't have an account to use the C3 software, so I can't tell you where that is in the software. In the WinPV software it's under gearing.

Title: Re: Grudge Box for M8 ratios needed for Power Vision tuner.
Post by: rigidthumper on July 24, 2024, 05:07:15 AM

Should be under "gear".

gear page.png

HarleyTechTalk

Vendors That Support This Site => Baker Drivetrain => Topic started by: Chopsahoy on July 27, 2020, 07:42:00 PM