HarleyTechTalk

Dyno & Tuning Zone => Dyno Runs => Topic started by: HD/Wrench on August 01, 2019, 05:35:03 AM

Title: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: HD/Wrench on August 01, 2019, 05:35:03 AM
Has GRC crank as it was very stuck , did NOT remove counter balancers Andrews Cam Stock heads Zero deck set up . This Bike RIPS


(https://live.staticflickr.com/65535/48430311621_b4c661eeed_b.jpg) (https://flic.kr/p/2gMC1mM)17 128 fulsac 2.0 cores stock heads tb tts (https://flic.kr/p/2gMC1mM) by GMR Performance (https://www.flickr.com/photos/146449314@N07/), on Flickr
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: dfwhockey17 on August 01, 2019, 07:34:35 AM
Hell of a job Man!!!
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: Ohio HD on August 01, 2019, 08:04:16 AM
As always, looks great Steve.
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: mike jesse on August 01, 2019, 12:14:28 PM
First build I've personally seen using the Fueling cams.

Looks like they work well in this combo.

 :up:
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: joes124 on August 01, 2019, 05:49:13 PM
what a curve...hold on!
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: yobtaf103 on August 02, 2019, 02:31:24 AM
Steady on there Steve,not the cam you quoted on GMR FB page?
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: rigidthumper on August 02, 2019, 10:18:11 AM
What's the CCP on this one? ;)
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: No Cents on August 02, 2019, 11:41:20 AM
   :up:
nice job Steve
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: HD/Wrench on August 02, 2019, 11:42:52 AM
I linked wrong sheet . That is the andrews cam I did two of these cam change was only change both 128 same EX system . I got in touch with admin maybe they can swap the sheets . The Fueling cam made slightly less pretty much same curves though . That is Andrews cam not the fueling .
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: 1workinman on August 04, 2019, 01:41:26 PM
Should be a fun ride
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: RTMike on September 11, 2019, 08:12:48 AM
Steve letís have some details on the motor
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: HD/Wrench on September 12, 2019, 05:39:06 AM
Not much to tell stock heads 128 andrews 550 cam fulsac ex system  parts are listed . just a nice combo of parts .
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: Grof on September 13, 2019, 09:01:30 PM
Not much to tell stock heads 128 andrews 550 cam fulsac ex system  parts are listed . just a nice combo of parts .
Steve did you have opportunity to swap exhaust for thunderheader or DnD or any other big name just to see results ... tnx
Title: Re: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0
Post by: scotman623 on September 14, 2019, 02:40:57 PM
Really IMPRESSIVE curve!! Guess I better be more aware of Andrew Cams... NICE...