Author Topic: Power Vision tune  (Read 984 times)

0 Members and 1 Guest are viewing this topic.

Offline Lone Ranger

  • Full Member
  • Posts: 101
  • Country: us
Power Vision tune
« on: February 08, 2019, 10:13:21 AM »
In some years there were two different, incompatible ECM’s on the same model bike. The bike could have either style ECM. The software levels between the two are NOT compatible, and thus a tune created for one is not going to work on the other. Once the Power Vision is married to the bike, it will look at the ECM, and offer the correct type of tune in the pre-configured tune database. Can I just replace the one that I had to download to the Power Vision that doesn't work with another new one in that slot, or can I delete or remove it?
« Last Edit: February 08, 2019, 03:15:40 PM by Lone Ranger »

Offline KE5RBD

  • Full Member
  • Posts: 291
  • Country: us
Re: Power Vision tune
« Reply #1 on: February 08, 2019, 10:34:44 PM »
If you have a stage 1 or stock improved map, then this will likely work.  If cams or other major differences, probably going to have issues.  I have seen this several times with the 02 to 05 models.  You have 105 or 127 strategy. On 06 you can have 127 and 141.   You may need to get your supplier to send you the other and put it on.  All you need is computer with the Win/PV software and you can load an emailed tune and install it on bike.  Not too difficult to do.
2014 FLHTK, PV2, Target Tune, Andrews 55, Game Changer, Rush Wrath 2 in 1

Offline Lone Ranger

  • Full Member
  • Posts: 101
  • Country: us
Re: Power Vision tune
« Reply #2 on: February 11, 2019, 08:24:17 AM »
Right, actually they emailed me both since the bike could take either. I downloaded them both to my Power Vision with Win PV. When I hook Power Vision back up to bike the tune with the letter "a" in it the ecm on the bike won't take so I flashed the other correct one and bike runs fine. I would like to remove the other tune that my ecm won't take because it's just taking up a slot unnecessarily. I know I can overwrite it with another tune I was curious if there's a way to just remove it.

Offline BUGLET

  • Full Member
  • Posts: 540
Re: Power Vision tune
« Reply #3 on: February 11, 2019, 08:46:08 AM »
   You can delete it from your Power Vision with Win PV

Offline Lone Ranger

  • Full Member
  • Posts: 101
  • Country: us
Re: Power Vision tune
« Reply #4 on: February 11, 2019, 08:50:02 AM »
Cool, so hook up Power Vision to computer, where on Win PV can I delete the tune in that slot?

Offline rigidthumper

  • Administrator
  • Full Member
  • *****
  • Posts: 5038
  • Country: us
  • Mark, 06/02: There's no cryin' in modifyin'
Re: Power Vision tune
« Reply #5 on: February 11, 2019, 09:05:15 AM »
Hook PV to laptop, open PV software, click on "Get Tune", select desired slot, then click on "Delete".

Offline Lone Ranger

  • Full Member
  • Posts: 101
  • Country: us
Re: Power Vision tune
« Reply #6 on: February 11, 2019, 09:12:43 AM »
Thank you everyone, I appreciate the help.

Offline chas

  • Member
  • Posts: 32
  • Country: us
Re: Power Vision tune
« Reply #7 on: February 22, 2019, 05:26:17 PM »
Hi- I recently purchased a power vision unit,and was wondering if there was a good manual on how to really use it? It comes with a quick start guide but doesnt really explain the process- Thanks in advance- Chas

Online HV

  • New Brunswick CANADA ( East Coast )
  • Administrator
  • Full Member
  • *****
  • Posts: 7377
  • Country: ca
  • 2013 FLTRX * Member Dec/2000*
    • HTT Admin
Re: Power Vision tune
« Reply #8 on: February 22, 2019, 05:41:56 PM »
If you go on Youtube and look for Power Vision Vids you will find a bunch of good instructions...Made by Dynojet
HV HTT Admin ..Ride Safe ...But Ride informed with HTT !!
Skype HV.HTT

Offline Lone Ranger

  • Full Member
  • Posts: 101
  • Country: us
Re: Power Vision tune
« Reply #9 on: February 26, 2019, 07:58:01 AM »
You can also just go to dynojet.com they have several videos there under "support" tab.

Offline Jamie Long

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 1231
  • Country: 00
    • Fuel Moto USA
Re: Power Vision tune
« Reply #10 on: February 26, 2019, 08:07:57 AM »
We have a fairly extensive knowledge base of technical info for Power Vision users on our FM University site https://university.fuelmotousa.com/