Author Topic: What cams should I use  (Read 284 times)

0 Members and 1 Guest are viewing this topic.

Offline Jesse v

  • Member
  • Posts: 4
  • Country: us
What cams should I use
« on: February 10, 2019, 07:54:28 AM »
I have a 99 1200 case West Wiseco 10 / 10 to 1 compression Dome top pistons stage 2 thunderstorm heads dynatek 2000i ignition module twin Tec single fire coil Primo clutch and right now I'm running Andrews N8 cams I'd like to change them I think to a cam with more business in the front what do you think would be a good fit

Offline rigidthumper

  • Administrator
  • Full Member
  • *****
  • Posts: 4677
  • Country: us
  • Buying a scalpel, don't make you a surgeon.
Re: What cams should I use
« Reply #1 on: February 10, 2019, 09:23:34 AM »
"More business in the front".
Better low/mid range? N2 works better @ 10:1 than the N8.

Offline 72fl

  • Full Member
  • Posts: 595
Re: What cams should I use
« Reply #2 on: February 10, 2019, 10:16:40 AM »
I have a 99 1200 case West Wiseco 10 / 10 to 1 compression Dome top pistons stage 2 thunderstorm heads dynatek 2000i ignition module twin Tec single fire coil Primo clutch and right now I'm running Andrews N8 cams I'd like to change them I think to a cam with more business in the front what do you think would be a good fit

Sent you a PM

Offline Jesse v

  • Member
  • Posts: 4
  • Country: us
Re: What cams should I use
« Reply #3 on: February 10, 2019, 10:27:05 AM »
I was thinking possibly the N4 possibly an n6 or the SE 536s or the fueling 515

Offline jrchilds

  • Member
  • Posts: 6
  • Country: us
Re: What cams should I use
« Reply #4 on: February 10, 2019, 12:00:13 PM »
Check out Hammer. Their 560 may be what you are looking for.
Jack

Online Rsw

  • Site Supporter
  • Full Member
  • *****
  • Posts: 199
  • Country: us
Re: What cams should I use
« Reply #5 on: February 10, 2019, 08:02:50 PM »
+1 on Hammer none better on Sportster performance

Offline Hilly13

  • Full Member
  • Posts: 1295
  • Country: au
Re: What cams should I use
« Reply #6 on: February 11, 2019, 01:24:02 AM »
Jesse, look at reply number 1, he knows his stuff.
Just because its said don't make it so

Offline jsachs1

  • Full Member
  • Posts: 1352
  • Country: 00
Re: What cams should I use
« Reply #7 on: February 11, 2019, 03:04:51 PM »
SE 536 cams work very well. :up: You just need to be sure on valve to valve, and valve to piston clearance.
John