Author Topic: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath  (Read 729 times)

0 Members and 1 Guest are viewing this topic.

Offline 838

  • Site Supporter
  • Full Member
  • *****
  • Posts: 212
  • Country: us
Here she is! Don did the heads and cases, Bob Lobenberg did the tune and my dad and I did the assembly. Thanks to Darren (Durwood) for the advice with the cams and the pipe. Bob said these parts all play very well together. Don thanks for everything! Everybody else that helped out along the way, thank you, this site has so much knowledge and generous people that helped make this project possible.

Only got to run her around the block (twice  :teeth:) but there is smooth power delivery everywhere!

I’ll comment more on the way it rides real soon!

  [ You are not allowed to view attachments ]  
« Last Edit: May 11, 2019, 07:03:12 PM by Coyote »

Offline Tail Ridr

  • Full Member
  • Posts: 116
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #1 on: May 12, 2019, 05:33:01 AM »
All the proof you need in a good tune... :teeth:   Good job to all, nicely done!
Eliminate the Imperfections of mass production!

Offline wfolarry

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2701
  • Country: us
  • BREATHE DEEP
    • Larry's Motorcycle & Machine Inc.
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #2 on: May 12, 2019, 05:45:12 AM »
 :up:

Offline No Cents

  • Full Member
  • Posts: 8379
  • Country: us
  • there is no cure for what I got !
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #3 on: May 12, 2019, 06:50:18 AM »
  nice job to all   :up:
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1159
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #4 on: May 12, 2019, 07:59:51 AM »
 :up:

Offline lucasg

  • Full Member
  • Posts: 339
  • Country: ca
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #5 on: May 12, 2019, 08:29:27 AM »
Looks like a real strong runner...great job to all  :up: :up:

Offline scott7d

  • Full Member
  • Posts: 143
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #6 on: May 12, 2019, 03:00:44 PM »
So much for the lazy bottom end on those 595's. Perfect torque curve!

Offline 838

  • Site Supporter
  • Full Member
  • *****
  • Posts: 212
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #7 on: May 12, 2019, 04:32:00 PM »
So much for the lazy bottom end on those 595's. Perfect torque curve!

CCP 210/210

Bob said it was an easy tune, also.

Offline Bagger

  • Full Member
  • Posts: 779
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #8 on: May 12, 2019, 05:08:17 PM »
Awesome TQ under 3000 rpm - 120 TQ at 2400 rpms.  Can you post pic of exhaust side of bike

Offline 838

  • Site Supporter
  • Full Member
  • *****
  • Posts: 212
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #9 on: May 12, 2019, 06:02:31 PM »
Awesome TQ under 3000 rpm - 120 TQ at 2400 rpms.  Can you post pic of exhaust side of bike

This is the only one I have of the bike since the build.

Online jrgreene1968

  • Site Supporter
  • Full Member
  • *****
  • Posts: 448
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #10 on: May 12, 2019, 06:37:56 PM »
That’s getting it done :up:, good looking bike to
What did Don do with your heads?

Offline Bagger

  • Full Member
  • Posts: 779
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #11 on: May 13, 2019, 05:14:38 AM »
https://harleytechtalk.com/htt/index.php?topic=108705.0

2009 FLHX 117” 11:1 compression (210 / 210 ccp)
Fuel Moto 117”  kit (CP pistons -1.5cc and cylinders)
Don Dorfman Pro headwork package
Stock 96” castings. 1.98” Int / 1.61” Ext.  86cc chambers / 650 springs
0.030” head gasket
Don also did the S&S crank install, Timken conversion and bored the cases
Cycle-Rama 595i chain drive cams in S&S tc3 pump and plate
WFO Larry lifters (2313SE)
Fuel Moto pushrods (Smith Bros.) adjustable
SE 58mm throttle body with 5.3 injectors
Rush Wrath with 2.5” baffle
SE diaphragm spring with VPC
« Last Edit: May 13, 2019, 05:23:26 AM by Bagger »

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4373
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #12 on: May 13, 2019, 05:20:57 AM »
Glad it worked out so well for you 838. :up:

Offline Freedom1974

  • Member
  • Posts: 10
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #13 on: May 13, 2019, 09:24:35 PM »
Monster curve !

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5933
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #14 on: May 14, 2019, 11:59:31 AM »
curve looks great and so does the bike  :up:
Colorado Springs, CO.

Offline biggzed

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1995
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #15 on: May 15, 2019, 09:30:59 AM »
Very nice. Good to see Bob still doing his thing. Kind of miss his contribution around here.

Zach

Offline 838

  • Site Supporter
  • Full Member
  • *****
  • Posts: 212
  • Country: us
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #16 on: May 15, 2019, 01:42:53 PM »
About 200 miles on it now. It’s amazing. The street manners are better than when it was a 96” with Andrews 48s. Just cruising around town it’s a total sleeper (which is a good thing here in the “people’s republic”) I’m surprised at how mellow the Wrath can be... until you twist the throttle and this sucker lights up! The power is right there all the time without any touchy throttle feel. Runs cool. It’s better than I expected in every way.

Offline yobtaf103

  • Site Supporter
  • Full Member
  • *****
  • Posts: 294
  • Country: gb
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #17 on: May 16, 2019, 05:38:28 AM »
Nice Job :up:

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5933
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2009, 117”, FLHX, HDSP heads, CR595i, 58mm, Rush Wrath
« Reply #18 on: May 16, 2019, 06:23:33 AM »
About 200 miles on it now. It’s amazing. The street manners are better than when it was a 96” with Andrews 48s. Just cruising around town it’s a total sleeper (which is a good thing here in the “people’s republic”) I’m surprised at how mellow the Wrath can be... until you twist the throttle and this sucker lights up! The power is right there all the time without any touchy throttle feel. Runs cool. It’s better than I expected in every way.

thumbs up to all involved - you had a great team  :up:
Colorado Springs, CO.